1 / 4 ยท Click the photo to enlarge
DOMINOX CT-211 Pipe Reamer with Drill Adapter, 1/4 to 1-3/8 in
Model CT-211 kit
1/4-1-3/8in
The CT-211 reamer with its drill adapter fitted. Chuck it and deburr at the pull of a trigger.
What it does
Reamer and adapter in one piece. Chuck the hex shank in any drill and it deburrs inner and outer edges on tube from 1/4 to 1-3/8 inch while the drill does the turning.
It works on copper, brass, stainless, aluminium and PVC.
Good to know before you buy
- Run the drill slowly. Speed chatters and scores the tube.
- The drill is not included.
- If you own a CT-211 already, the adaptor alone costs less.
Specifications
- Range
- 1/4 to 1-3/8 in O.D.
- Drive
- Hex shank for a standard drill chuck
- Deburrs
- Inner and outer edge
In the box
- Reamer
- Drill adapter
More DOMINOX Tubing Tools
-
CT-212
CT-212 Tubing and Pipe Reamer, 1/2 to 2-1/8 in
The large reamer for mains and refrigeration lines up to 2-1/8 inch.
1/2-2-1/8in
-
CT-211
CT-211 Tubing and Pipe Reamer, 1/4 to 1-3/8 in
Deburrs the inside and the outside of a tube end with a few turns of the wrist.
1/4-1-3/8in
-
CT-650
CT-650 Tubing Cutter with Deburring Tool
One cutter from 3/16 to 2 inch copper, with a deburring pen in the box.
3/16-2in