DOMINOX tubing tools
9 tools for metal tube: cut it, take the burr off, bend it. Sized for water lines, line sets, brake and fuel lines.
-

CT-650
CT-650 Tubing Cutter with Deburring Tool
One cutter from 3/16 to 2 inch copper, with a deburring pen in the box.
3/16-2in
-

JJ1322
JJ1322 Mini Tube Cutter, 1/8 to 7/8 in
A cutter the size of a matchbox for tubing you can barely reach.
1/8-7/8in
-

CT-211
CT-211 Tubing and Pipe Reamer, 1/4 to 1-3/8 in
Deburrs the inside and the outside of a tube end with a few turns of the wrist.
1/4-1-3/8in
-

CT-212
CT-212 Tubing and Pipe Reamer, 1/2 to 2-1/8 in
The large reamer for mains and refrigeration lines up to 2-1/8 inch.
1/2-2-1/8in
-

3-flute
1/2 in Tubing Reaming and Deburring Tool
A three-flute pen for the inside edge of brake, fuel and AC lines.
1/2in
-

CT-369FHA-1
CT-369 4-in-1 Tube Bender
Four grooves, four sizes: 3/16, 1/4, 5/16 and 3/8 inch soft tubing, bent to 180 degrees.
0-180°
-

CT-308
CT-308 Refrigerant Recovery Plier
Clamps on a sealed copper line and pierces it, so the charge goes to your recovery machine.
4-8mm
-

CT-308-set
CT-308 Recovery Plier Set with 3 Spare Needles
The CT-308 recovery plier with three spare tungsten needles in the box.
3spare needles
-

CT-211-SP
CT-211-SP Drill Adaptor for the CT-211 Reamer
Turns the CT-211 hand reamer into a drill-driven one.
CT-211fit
Tube sizes each tool takes, outside diameter
Every bar is one tool. It starts at the smallest outside diameter the tool takes and ends at the largest.
How to pick
- Start with a cutter that covers your largest tube. The CT-650 reaches 2 inch. The mini cutter fits where it cannot turn.
- Add a reamer. A cut tube has a lip inside that slows the water and wears the pipe.
- Bend soft tube with a former. By hand it kinks.
Good to know before you buy
- Wheel cutters are for tube walls under 0.1 inch. They are not for steel pipe.
- The recovery plier is a trade tool. It needs a recovery machine and the training to use one.
- A reamer cleans an edge. It will not fix a tube you crushed in the cut.