
1 / 7 · Click the photo to enlarge
DOMINOX CT-650 Tubing Cutter with Deburring Tool
Model CT-650
3/16-2in
One cutter from 3/16 to 2 inch copper, with a deburring pen in the box.
What it does
This covers nearly every copper size in a house, from a 3/16 inch line to a 2 inch main. Two rows of ball-bearing rollers hold the tube so the wheel tracks in one groove.
The knob is rubber-wrapped for a fine feed. The deburring pen in the kit cleans the inside edge after the cut.
It is a step in one of our job rows: Join copper pipe.
Good to know before you buy
- For tube walls under 0.1 inch. It is not for steel pipe.
- Tighten a little each turn. Forcing the wheel ovals soft copper.
- The deburring pen is for a light inner burr. For large tube, use a reamer such as the CT-211.
Specifications
- Model
- CT-650
- Cuts
- 3/16 to 2 in O.D.
- Wall
- under 0.1 in
- Materials
- Copper, brass, aluminium, thin stainless
- Body
- Aluminium alloy
- Weight
- 1.48 lb
In the box
- Tubing cutter
- Deburring tool
What buyers say
5 out of 5
On the cutting edge!
This tool is no tool, it's sharp. The tool has an edge to it that makes it stand apart from the rest, and never a dull moment.Tube and pipe stand no chance, you can cut them in half, with this in your pants.
4 out of 5
~Will cut not just copper tubing but other things~
~Will cut not just copper tubing but other things~I got this not sure I would need it but needed to cut some copper tubing when we had a leak, this works great.Easy to adjust to the size you need, then go around in circle till cut.
5 out of 5
Heavy Duty Pipe Cutter
This pipe cutter feels heavy duty! My small close quarters tubing cutter is great for getting into tight spaces, but the cutting capacity is limited to around 1". This pipe cutter expands up to 2", but you need the clearance to be able to operate. Overall length is about 7.5" and width is 2.75". The knob is easy to grasp to tighten.
More DOMINOX Tubing Tools
-

CT-211-SP
CT-211-SP Drill Adaptor for the CT-211 Reamer
Turns the CT-211 hand reamer into a drill-driven one.
CT-211fit
-

CT-308
CT-308 Refrigerant Recovery Plier
Clamps on a sealed copper line and pierces it, so the charge goes to your recovery machine.
4-8mm
-

CT-369FHA-1
CT-369 4-in-1 Tube Bender
Four grooves, four sizes: 3/16, 1/4, 5/16 and 3/8 inch soft tubing, bent to 180 degrees.
0-180°